SYNTRUCK UHPD PLUS 10W-40

1 x 60 L drum

Part.nr.: 50110

SynTruck UHPD Plus 10W-40 is a fuel saving 'Low-SAPS' lubricant with the following properties:

  • Very powerful detergency, minimizing deposits in the hot zone of the engine
  • Very strong dispersion that restricts the formation of particles to a minimum
  • High and stable natural viscosity index
  • Low sulphated ash, phosphor and sulphur content ('Low-SAPS')
  • Powerful resistance against wear, resulting in strongly reduced wear of piston rings and cylinder-liners
  • Lower fuel consumption

Application

SynTruck UHPD Plus 10W-40 is suitable for EGR engines with or without DPF(diesel particulate filter). This 'Low-SAPS' lubricant is recommended for EURO 4, EURO 5 and EURO 6 engines in combination with diesel fuel with a low sulphur content. The product can be used under the toughest operating conditions all year round. Always check the product recommendation database for the right application.

Product specifications

ACEA E6, E7, E9
API CI-4
Deutz DQC IV-18 LA
Mack EO-N
MB 228.51
Renault VI RLD-2
Volvo VDS-3
Cat ECF-1
Cummins CES 20076/20077
JASO DH-2
MAN M 3477 / M 3271-1
MTU Type 3.1
DAF Extended Drain
Iveco 18-1804 TLS E6
Renault VI RXD / RGD

Typical standard analyses

Density at 15 °C, kg/l 0,864
Viscosity -25 °C, mPa.s 5810
Viscosity 40 °C, mm²/s 98,20
Viscosity 100 °C, mm²/s 14,70
Viscosity Index 156
Flash Point PM, °C
Flash Point COC, °C 246
Pour Point, °C -36
Total Base Number, mgKOH/g 10,4
Acid number, mgKOH/g
Sulphate Ash, % 1,00
Noack, % 9,0