FERROMAX MP 32
Available packagings
1 x 60 L drum
Part.nr.: 50520
FerroMax MP 32 is a multi-purpose cutting oil based on hydrogenated mineral base oils. It has been supplemented with special anti-mist and anti-wear additives to achieve the following properties:
- High pressure absorption capacity
- Minimal tool wear
- Minimal mist formation
- Good air-release
- Minimal foaming
- Non-aggressive on paints on the workpieces
- Well tolerated by the skin
Application
FerroMax MP 32 must be used in undiluted form. This multi-purpose cutting oil is suitable for cutting and drilling higher-tensile strength free-cutting steel and for non-ferrous metal and light metals. FerroMax MP 32 also has the properties of a hydraulic oil and a transmission oil.
Typical standard analyses
| Density at 15 °C, kg/l | 0,876 |
|---|---|
| Viscosity 40 °C, mm²/s | 32,30 |
| Viscosity 100 °C, mm²/s | 5,61 |
| Viscosity Index | 112 |
| Flash Point COC, °C | 224 |
| Pour Point, °C | -12 |
| Total Base Number, mgKOH/g | 0,3 |
| Acid number, mgKOH/g | 1,56 |